Meet the AP9510 Outdoor Access Point
|
I： |
Dual Band WIFI6 802.11ax MU-MIMO, Up to 100 simultaneous connections |
|
II： |
Qualcomm IPQ6000 + QCA8075 + QCN5022 + QCN5052 |
|
III： |
Waterproof Outdoor Casing, IP67 Protection |
|
IV： |
Full support for IPV4 and IPV6 network technology |
|
V： |
External 6dBi~8dBi Omni-Directional Antenna, and antenna port has been built-in 5KA high-spec lightning protection chip |
|
VI： |
FIT and FAT AP Mode, Adjustable TX Power, Coverage Radius 200 Meters |
|
VII： |
6KA/6KV enhanced lightning protection, completely satisfy the requirements of industrial-grade use |
|
VIII： |
Support 1024QAM modulation, data transmission efficiency is increased by 25% compared with 802.11ac (256QAM) |
|
IX： |
Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. |
|
X： |
Support spatial multiplexing technology, so AP and terminals can distinguish overlapping BSS (basic service set), to minimize co-channel interference. |
|
WIRELESS |
|
|
Wireless mode |
IEEE 802.11ax, Access Point (AP) |
|
Working frequency |
2.4GHz Radio: 2.4000GHz ~ 2.4835GHz 5GHz Radio: 5.150~5.250,5.250~5.350,5.470~5.725, 5.725~5.850GHz |
|
Max. Transmit Power |
2.4GHz Radio: 22dBm @ MCS0, 19dBm@MCS7 5GHz Radio: 22dBm @ MCS0, 19dBm@MCS7 |
|
Data Rate |
2.4G Radio: 802.11b: 1, 2, 5.5, and 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n HT20/ HT40: MCS0~MCS15 (400/ 800ns GI) 802.11ax HE20/ HE40: MSC0 ~ MCS11(400/ 800ns GI) 5G Radio: 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54Mb/s 802.11n HT20/ HT40: MCS0~MCS15(400/ 800ns GI) 802.11ac VHT20/VHT40/VHT80: MCS0 ~ MCS9(400/ 800ns GI) 802.11ax HE20/ HE40/HE80: MSC0 ~ MCS11(400/ 800ns GI) |
|
WiFi security |
WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
|
SSID |
SSID stealth mode and access control based on MAC address |
|
WiFi users |
Up to 100 simultaneous connections |
|
PHYSICAL INTERFACE |
|
|
WAN |
1 x GBE Uplink, Support 802.3at Power Supply |
|
Antenna |
4 x N-Type Antenna |
|
LED |
1 x SFP status LEDs, 1 x SYS LED,1 x Power LED,1 x 5G WIFI LED, 1 x 2.4G WIFI LED |
|
NETWORK |
|
|
Routing |
Static routing, Dynamic routing |
|
Network protocols |
TCP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, TLS, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP |
|
Connection monitoring |
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Firewall |
Port forwarding |
|
DHCP |
Static and dynamic IP allocation, DHCP Relay |
|
QoS |
Traffic priority queuing by source/destination, service, protocol or port |
|
DDNS |
Supported >25 service providers, others can be configured manually |
|
SECURITY |
|
|
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention) |
|
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
|
MONITORING & MANAGEMENT |
|
|
WEB UI |
HTTP, status, configuration, FW update,troubleshoot, event log, system log, kernel log |
|
SNMP |
SNMP (v1, v2, v3) |
|
SYSTEM CHARACTERISTICS |
|
|
CPU |
Qualcomm IPQ6000 + QCA8075 + QCN5022 + QCN5052 |
|
RAM |
512MB DDR3L Memory |
|
FLASH storage |
16MB SPI NOR Flash + 128MB NAND Flash |
|
POWER |
|
|
Input voltage range |
48V ~ 57V, 802.3at PSE |
|
Power consumption |
< 25 W Max |
|
PHYSICAL SPECIFICATION |
|
|
Casing material |
Aluminium Alloy, Wall or Pole Installation |
|
Dimensions (W x H x D) |
265 x 195 x 85 mm |
|
Weight |
1820 g |
|
OPERATING ENVIRONMENT |
|
|
Operating temperature |
-40 °C to 75 °C |
|
Operating humidity |
5% to 95% non-condensing |
|
Ingress Protection Rating |
IP67, No Fan design |
|
REGULATORY & TYPE APPROVALS |
|
|
Regulatory |
CE, FCC, CCC |
|
EMI IMMUNITY |
|
|
Standards |
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0 |
|
ESD |
EN61000-4-2:2009 |
|
RS |
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
|
EFT |
EN 61000-4-4:2012 |
|
Surge immunity (AC Power Line) |
EN 61000-4-5:2006 |
|
Surge immunity (Ethernet ports) |
EN 61000-4-5:2014, clause 7.1 of ITU-T K21 |
|
CS |
EN 61000-4-6:2009 |
|
DIP |
EN 61000-4-11:2004 |
|
RF |
|
|
Standards |
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 |
Please choose the suitable model for your project.
Standard Package Includes:
* 1x AP9510
Note: All accessories can be customized.
RELATED PRODUCTS
